Magnacoustics Genesis ULTRA Guía para resolver problemas descargar pdf (Pagina 10)

Technologist Control Unit Operation

Terminology: TCU = Technologist Control Unit

1: To turn Genesis MRI Music ON from TCU push the Green Power button (located on the top right

corner).

2: To adjust Technologist’s Speaker Music Level depress the Green TECH VOL+ and the Red

VOL– (located to the left of the Power button) for UP and Down respectively. The Stereo will show

the level. To Mute the Technologist’s Speakers depress the Violet TECH MUTE button (located

under the Red VOL- button). The “ON” will flash on the mid right side of the display in the MUTE

box.

3: On power up the microprocessor sets VOL, Mic, and AVC level for patients wherever it was left

when the system was turned off. The number equals the percentage of volume and the horizontal

bar gives a quick visual representation.

4: Depressing the Green Mic button (located on bottom left corner) will allow you to override music

and talk to the patients. Level can be adjusted buy depressing Green Mic VOL+, or the Red VOL-,

for UP and Down respectively. A good starting point is 50. When Mic button is depressed you will

see “Mic” on the lower left “MODE” box of the display.

5: When the AVC (intercom integration) input has triggered from depressing the Mic button on your

GE Intercom (providing the intercom integration kit was installed) the Display will show AVC in the

lower left “MODE” box, and the music to the patient will be interrupted. The AVC level and the

console intercom level will control the level to the patients (it’s a good idea adjust the AVC and,

leave the console set the same for a Patient without Headsets.) A good starting point is 50 but no

two MRIs are the same.

6: Depressing the Red PAT OVERRIDE button (located above the Mic button) will toggle thru locking

out the patient from adjusting the VOL, SEL, VOL SEL, or OFF. This will also be displayed on the

lower right “PAT OVR” box.

7: We recommend getting in the habit of depressing the Red PAT MUTE button (located above PAT

OVERRIDE button) after each patient (this way when you are setting up a new patient they will be

able to hear you, if the music is on they probably can’t.)

8: Depressing the Green VOL NORM button (located above VOL OFF button) will raise Volume for

the Patients to 20. This preset is a good starting point and can be adjusted in program mode

described in step 14.

9: Depressing Red MUSIC VOL- button (located above the VOL NORM button) will lower Volume for

the Patients, and depressing the Green MUSIC VOL+ (located above the MUSIC VOL- button)

will raise Volume for the Patients.

10: The Genesis has a feature called AUTO GAIN this provides the ability to automatically adjust

volume level of music to Patients dependent on the amount gradient noise being created by MRI.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sin comentarios

Magnacoustics Genesis ULTRA Guía para resolver problemas Pagina 10